Paver sealers are highly skilled in preserving the appearance of your driveway, patio, or walkway. While you can do the job yourself, hiring a professional is recommended for a long-lasting and attractive look. Before sealing your pavers, you should consider a few factors. For instance, you should always wear protective gear that will protect your skin from the sealant. Wearing protective gear is essential for avoiding overspray and fumes. You should also use a well-ventilated area. Check this out for more information.


The process of paver sealing is not inexpensive. Depending on your contractor, the cost can run from a few hundred dollars to thousands of dollars. It can take several hours or even a full day, so it is important to factor this cost into your budget and schedule. Also, paver sealing is different from traditional solutions. The right sealer can keep your pavers in tip-top shape for years to come. You should find out what materials and methods will be used to seal your pavers.

The cost of paver sealing varies by material. Different materials require different methods and sealers. The final cost per square foot may also depend on the level of porosity of the pavers. In general, the more sealer a paver needs, the more it costs per square foot. If you’re unsure of the amount you’ll need, you can always choose to go with unsealed pavers.


If you have a concrete patio or driveway, you may be wondering if paver sealing is necessary. Just like waxing a car, paver sealing creates a barrier that prevents spills, harmful moisture, and the harmful UV rays that cause fading and discolouration. While paver sealers can last for years, they will eventually wear off because of sunlight, heavy rain, and foot traffic. Taking care of your pavers should be a priority.

A professional sealer protects your pavers from damage, prolonging their vibrance, and increasing their value. Different brands of sealants have different properties, so it’s important to choose the right one for your paver type. For instance, if your pavers are wet-cast, you should use a wet-cast sealer. If your pavers are power-washed, you may end up leaving ugly lines in the pavers.


There are several types of paver sealers available in the market. However, most of these are solvent-based products and will darken the paver surface. If you want a smoother and more durable finish, you should choose a water-based paver sealer. Solvent-based products have low VOCs, are nonflammable, and are easy to clean. Water-based paver sealers can cover approximately 1,500 square feet per gallon.

When choosing a paver sealer, the type of paver you have and the type of installation you have will play an important role in the success of the process. Certain paver sealers are suited for porous surfaces like travertine and tiles. This allows them to absorb various pollutants, oils, and dirt. Sealing prevents these pollutants from reaching the surface and can prevent pest infestation. While sealants can change the appearance of pavers, they should be applied by a licensed professional with the right equipment.

Cost of a professional sealer

The cost of paver sealing is influenced by the type of pavers you have. Different materials require different sealers and sealing methods. This, in turn, can make the final cost per square foot vary. Porosity of pavers can also impact the final cost – the more porosity in a paver, the more money it will cost to seal it. Here are some things to keep in mind when estimating the cost of paver sealing:

A quality sealant can add years of life to your hardscaped area. It fills in any natural pores and helps prevent stains. It also gives the pavers an overall sheen. The additional protective coating makes it easier to clean and prevent weed growth. It’s recommended for areas where a lot of people gather, but those that are not used as often may wish to skip this step. Water-based sealers do not give the highest shine, and are suitable for porous bricks.

Whether to seal your own pavers or hire a professional sealer

Whether to seal your pavers yourself or hire a professional depends on the look you want to achieve. If you want a more polished, glossy finish, you can seal them yourself. If you prefer a natural look, however, you can consider hiring a professional sealer for the job. The cost of paver sealing will vary depending on the type of paver and sealant you choose. Regardless of the cost, paver sealing is worth the investment.

The process of sealing pavers is similar to setting stones. Some sealants are applied with a roller or paint brush, while others require spraying. While you can seal your own pavers, some sites recommend hiring a professional sealer to avoid potential zoning regulations, property access, or permits. This process will require multiple applications. If you don’t have the time or the expertise, consider hiring a contractor to apply the sealant. Continue reading about.